圖片僅供參考,產品以實物為準
福祿克 80i-110s 交/直流電流鉗產品詳細規格
主要特性
- Current Range: 0.1 to 100A DC or 0.1 to 70A AC
-
Basic Accuracy (DC to 1kHz):
100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA
10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA
40A to 80A +/- 12% of reading + 50mA
80 to 100A +/- 15% of reading - Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
- Bandwidth: 1Hz to 20kHz
- Working Voltage: 600V AC rms
- Maximum Conductor Size: 11.8 mm (.46 inch) diameter
- Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
產品規格: 80i-110s 交/直流電流鉗
Specifications
Nominal current range
10 A, AC/DC
100 A, AC/DC
Continuous current range
0.1 A - 10 A AC/DC
1 A - 100 A AC/DC
Maximum non-destructive current
140 A - 2 kHz
Lowest measurable current
0.1 A
Basic accuracy
100 mV/A setting: 50 mA to 10 A ±3% of reading +50 mA
10 mV/A setting: 50 mA to 40 A ±4% of reading +50 mA
40 A to 80 A ±12% of reading +50 mA
80 to 100 A ±15% of reading
Useable frequency
DC - 100 kHz
Output level(s)
10 A range: 100 mV/A
100 A range: 10 mV/A
Zero error adjustment
Yes
Safety Specifications
Safety
CAT II, 600 V
CAT III, 300 V
Maximum voltage
600 V
Mechanical and General Specifications
Warranty
1 year
Battery life
9 V, 55 h
Maximum conductor diameter
11.8 mm
Output cable length
1.6 m
BNC adapter
Yes
型號: 80i-110s 交/直流電流鉗
Fluke 80i 110s
交/直流電流鉗
產品概述: 80i-110s 交/直流電流鉗
80i-110交/直流電流鉗與任何福祿克示波表、功率諧波分析儀、萬用表或其他電壓測量工具兼容，其具有以下特點：BNC輸入連接器或如果使用儀表，使用適配器PM9081/ 001將香蕉插頭轉換為BNC連接器。